Decking
- DB12520
- 125 × 20 mm
- DB14025
- 140 × 25 mm
Outdoor Decking
Composite timber for decks, walls, screens and ceilings.
Flooring · Decking
Kent composite timber pairs a Kent Skin surface, an acrylic polymer cap with anti-UV additives, with a stable Kent Core. It looks, feels and sounds like real wood, but it will not crack, split, swell or rot, resists termites and water, and needs none of the upkeep of timber.
25 yrsLimited warranty, up to
R13Slip resistance, oil-wet ramp test
B-s2,d0Fire class, EN 13501-1
0.9%Water absorption
Kent Skin
An ASA polymer surface with anti-UV additives, made for sun and rain.
Kent Core
A modified polymer composite core that stays stable at high temperatures.
Low maintenance
Termite and water resistant, with no oiling or sealing like timber.
Recyclable
Made from wood waste, timber debris and polymer. 100% recyclable.
Three finishes
Brushed, sanded or embossed surface, in seven colours.
Built for pools
For courtyards, boardwalks, gardens, terraces and swimming pools.
In the room
See it installed.
The range
More than decking.
Exterior wall cladding
- Widths
- 109 to 260.5 mm
- Thickness
- 10 to 30 mm
- Trim
- YFO-01 angle, 35 × 45 mm
Facade screens and louvers
- From
- 35 × 16 mm
- Up to
- 200 × 100 mm
- Uses
- Sun shades, sliding and folding window shades
Interior cladding and ceiling
- Widths
- 25 to 260.5 mm
- Hangers
- THZ-01 to THZ-03, 40 or 80 mm gaps
Kent-SJS joist system
- Use
- Terraces and roofs, uneven or sloping ground
- Double joist heights
- 78 to 165 mm
Pedestals
- PP-01 to PP-06
- 18 mm up to 220 mm
Fabrication
- Works
- Cabins, pergolas, trellises, benches and carpentry
Designs
Pick your colour.
Seven colours
7 designsBrushed, sanded or embossed. Colours vary a little between batches.
Colours on screen are a guide. See the real samples at a showroom before you order.
Specifications
The details.
Test results from the Kent composite timber catalogue, tested on 125 × 20 mm decking unless noted.
Safety
- Slip, oil-wet ramp (SS 484)
- R13, 40.1°
- Pendulum, wet (CEN/TS 15676)
- 69 to 74; EN 15534-4 needs 36 or more
- Fire (EN 13501-1)
- B-s2,d0
- Fire (BS 476 parts 6 and 7)
- Class 1Y, wall panels and screens
- REACH and RoHS
- Pass
Strength
- Flexural load (EN 15534-1)
- Average 3665 N; EN 15534-4 needs 3300 N
- Deflection at 500 N
- 0.74 mm average
- Bending strength
- 27.6 MPa
- Falling mass impact
- No cracks in 10 specimens
- Cold impact (-10°C)
- No crack
Weather and wear
- Weathering, 3,500 h (ASTM G154)
- Colour change ΔE 3.6 to 4.3
- Water absorption
- 0.90%
- Moisture content
- 0.89%
- Abrasion (ASTM D4060)
- 51.5 mg per 1000 cycles
- Skin adhesion (ISO 2409)
- Class 0, no peeling
Board
- Density
- 1.06 g/cm³
- Decking profiles
- 125 × 20 mm, 140 × 25 mm
- Colours
- 7
- Warranty
- Up to 25 years, limited
Keep exploring
More from Kent.
Planning
a project?
Requesta quote