Mosaic
600 × 1200 / 1200 × 3000 mm · 3–6 mm thick
Walls · Stone veneer
Also called soft stone, it is made from modified clay with crushed stone, sand, fly ash and recycled cement, cured by heat and light into a thin, flexible sheet. It breathes like stone, resists moisture, fire and UV, and comes in large, light sheets for walls and columns, inside and out.
24Designs
66Colours
2.5–8 mmThickness
1200 × 3200Largest sheet, mm
Wraps curves
Flexible enough for columns, arches and curved walls.
Stone benefits
Breathable, moisture resistant and fire resistant like natural stone.
Outdoors too
Resists UV, so it suits facades and exterior walls.
Light and large
Big sheets that weigh far less than stone and go up quickly.
In the room
See it installed.
Designs
24 designs, 66 colours.
Starmoon stone
600 × 1200 / 1180 × 3200 mm · 4–8 mm thick
Square line stone
580 × 200 mm · 3–8 mm thick
Fine line stone board
600 × 1200 / 600 × 3000 mm · 3–5 mm thick
Line stone board
600 × 1200 / 600 × 2400 mm · 4–8 mm thick
Rough granite
1150 × 3000 mm · 3–5 mm thick
Concrete board
600 × 3060 mm · 3–5 mm thick
Weaving
600 × 1200 / 600 × 3000 mm · 3–5 mm thick
Ripple board
1060 × 2780 mm · 3–8 mm thick
Round line stone
595 × 2800 mm · 3–8 mm thick
Saw board
580 × 3150 mm · 3–6 mm thick
Travertine
600 × 1200 / 1200 × 3000 mm · 2.5–3.5 mm thick
Slate
600 × 1200 / 1200 × 2800 mm · 2.5–3.5 mm thick
Ridged stone
600 × 1200 / 600 × 2400 mm · 3–5 mm thick
New rock cut stone
1135 × 3000 mm · 5–8 mm thick
Cut stone
600 × 1200 mm · 2.5–3.5 mm thick
Wall tiles
1180 × 2960 mm · 3–5 mm thick
Rammed earth board
1200 × 3000 mm · 3–5 mm thick
Red mountain rock
1170 × 2940 mm · 3–8 mm thick
Muretto stone
600 × 1200 mm · 3–5 mm thick
Dacite
600 × 1200 / 1200 × 3000 mm · 3–5 mm thick
Charcoal burnt wood board
1180 × 3000 mm · 3–5 mm thick
Mosaic travertine
600 × 1200 mm · 3–6 mm thick
Aluminum foam
1130 × 2800 mm · 3–5 mm thick
Colours on screen are a guide. See the real samples at a showroom before you order.
Specifications
The details.
From the Kent Soft Stone catalogue. Sizes and thickness vary by design.
Material
- Composition
- Modified clay, crushed stone, sand, fly ash, cement waste
- Process
- Temperature-controlled moulding, baking and irradiation
Sheet
- Thickness
- 2.5 to 8 mm, by design
- Largest
- 1200 × 3200 mm
- Common
- 600 × 1200 mm
Use
- Where
- Interior and exterior walls, columns, facades
- Claims
- Breathable, moisture, fire and UV resistant
Planning
a project?
Requesta quote